          
Furrow Pump, Inc.
P.O.
Box 1849
8525 SW
St. Helens Dr.
Wilsonville,
OR 97070
Phone:
(800) 937-3666
FAX:
(800) 377-9960
www.furrowpump.com
|
Mixmate®
|
Customer Examples
These
are some typical answers to the questions found in the MixMate Selection Section. Given
this information, you can use the tables in the Specifications and Model Numbering Guide
Sections to select a MixMate for your particular application. Look first to determine the
number and size of flowmeter needed, then the mixer number and size, and finally whether
any of the options are of value to you. If you read through these Customer Examples and
the following Application Notes, you will find that we try to build up your depth of
polymer feed equipment knowledge the further you progress. Please give us a call if we can
clear up any questions.
|
| I. Waste Water Treatment
(WWT) |
IV. Gravel Pit WWT |
| Q1: 5 ppm |
| 2: 1-3 MGD |
| 3: Anionic emulsion |
| 4: 1 % |
| 5: 0.5 % |
| 6: 60 psi |
| 7: Open discharge |
|
| Q1: 100ppm |
| 2: 1-5 MGD |
| 3: Anionic emulsion |
| 4: 1 % |
| 5: 0.5 % |
| 6: 50 psi |
| 7: Open discharge |
|
| II. Municipal WWT |
V. Industrial WWT |
| Q1: 5-10 ppm |
| 2: 4-10 MGD |
| 3: Solution |
| 4: 5 % |
| 5: 5 % |
| 6: 50 psi |
| 7: 25 psi |
|
| Q1: |
10 ppm |
2: |
10,000 gal/batch/hour 5 minutes to deliver |
3: |
Non-ionic emulsion |
4: |
1 % |
5: |
0.5 % |
6: |
40 psi |
7: |
20 psi |
|
| III. Municipal WWT |
VI. Industrial WWT |
| Q1: 1 ppm |
| 2: 50-100 MGD |
| 3: Cationic emulsion |
| 4: 1 % |
| 5: 0.5 % |
| 6: 60 psi |
| 7: Open discharge |
|
| Q1: |
10 ppm |
| 2: |
10,000 gal/batch/hour 2 minutes to deliver |
| 3: |
Solution |
| 4: |
3 % |
| 5: |
3 % |
| 6: |
80 psi |
| 7: |
Open discharge |
|
|
Back to Mixmate Next |
|